fbpx

Seamless waterproofing without removing tiles or fixtures

by Darren
Seamless waterproofing

Liquid Waterproofing nationwide has a system comprised of a specially formulated chemical emulsion called P100, which is injected to the waterside of affected areas by the use of pressure pumping equipment to provide seamless waterproofing without the need for chopping or removal of tiles or fixtures.

 

Liquid Waterproofing nationwide has a system comprised of a specially formulated chemical emulsion called P100, which is injected to the waterside of affected areas by the use of pressure pumping equipment to provide seamless waterproofing without the need for chopping or removal of tiles or fixtures.

The emulsion is stable until it is chemically activated when it coagulates into a mass of matted rubber particles, which produce an exceptional flexible water membrane that is actually enhanced by increased pressure.

Liquid Waterproofing operates as a specialist company and is able to deal with all civil engineering water leakages of all types, derived from a uniquely experienced background of the toughest engineering environments.

This application is suitable for tunnels, patios, water treatment plants, basements, dams and water canals, lift shafts, silos, concrete pipes, collars and valve chambers, concrete slabs and much more.

P100 can be classified as an emulsion grout. It is a patented blend of rubberised chemical emulsions mixed with additives to promote flow and adhesion. The emulsion is stable until activated. It then breaks, and the colloidal dispersed rubber coagulates to form a jelly-like mass of matted rubber particles. It contains no toxic or hazardous materials other than 0,5% ammonia solution, which is present as a preservative but evaporates within minutes.

The activation of Pl00 emulsion may be achieved in three ways, namely agitation, chemical activation and exposure to atmosphere.

In all three these ways, a seamless and impervious waterproofing seal is achieved. The formulation can be adjusted to suit any application that is required to achieve the optimal and most proficient watertight seal.

The emulsion is stable until it is chemically activated, when it coagulates into a mass of matted rubber particles which produce an exceptional flexible water membrane that is actually enhanced by increased pressure.

New building applications
Liquid Waterproofing has various waterproofing applications i.e. poly urea and poly urethane to enable them to enter the market for new building projects, i.e. tanking of retaining walls permanently, sealing of large-scale concrete roofing and concrete slabs, basements, industrial flooring replacing tiles with a non-slip finish, reservoir lining and drinkable water tanks.

These applications can be applied to buildings after completion of the wet trades, eliminating costly damage to waterproofing membranes during construction, and saving major costs and inconvenience to clients and tenants at a later stage, with little or no maintenance.

The sealant technologies applied by Liquid Waterproofing have enabled the company to enter the arena of civil engineering structures, with the likes of poly urea and poly urethane technologies and it has successfully built up a good track-record by using its chemicals in structures such as grain silos for agricultural cooperatives, industrial and commercial buildings, and items including pump houses, pipelines, car park basements, reservoirs and dams, and valve chambers.

Civil engineering environments, pertaining to water leakages, are one of the toughest engineering environments in the world. Liquid Waterproofing employs the best expertise and specialists in this field, as well as utilising the best international technology to successfully solve water leakage problems.

Liquid Waterproofing
Tel: (012) 205 1812
Email: val@liquidwaterproofing.com
Website: www.liquidwaterproofing.com

You may also like