When developers and architects are faced with restricted or even no space at steep or small building sites, retaining walls with the smallest possible footprint on the plan must be designed to make it all possible.
This was certainly the case at the Twickenham residential development in Victory Park, Johannesburg. “The property was on a relatively steep gradient, which demanded close attention to the design and construction of a series of retaining walls, designed by Silvio Ferraris of Remacon Products and built by Powergate Construction, using the Terraforce retaining wall system,” says Deon Grimbeek and site manager, Hennie van der Merwe, both from Renico Construction.
For this project, Ferraris specified the Terraforce L11 block, which is supplied by Remacon Products, a Terraforce licenced manufacturer based in Gauteng. The installation features a series of near-vertical walls measuring up to 3m in height with a solid look, yet textured block finish. This was achieved by turning the blocks to face with their flat face outwards. The blocks were also cut to create a range of sharp corners, maximising every square inch of space.
Key action steps:
• “As most walls are 85°, they are reinforced with Secugrid 40/40 Q1 polypropylene grids where piling through the grids is required (the polypropylene can be cut through by the piling augers without it being all gnarled up in the auger and ripped out), and where no piling was required, Rockgrid PC 50/50 polyester was used,” says Ferraris.
• The corners were reinforced with hooped Y12 steel and filled with concrete to prevent future movement and corner cracking.
• Groundwater necessitated adequate drainage at the base of the walls. In all cases 100mm wick drains against the natural soil cut faces were used.
The steep walls are precisely installed with superbly constructed corners, remaining unplanted for little future maintenance, as requested by the client.
Tel: 021 465 1907
Main image: When there is no space, retaining walls with the smallest possible footprint on the plan must be designed.
For more technical articles, sign up for our newsletter: http://www.buildinganddecor.co.za/register/.